plastic deformation的例句大全

Shot Peening ( SP ) is a typical severe plastic deformation method to produce ultra-fine grains of metallic materials.

高能气动喷丸是通过剧烈塑性变形产生细晶材料的方法之一.

Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation.

低渗透气藏孔隙变形具有弹塑性变形的特征.

Impact load energy accumulating caused hardness change and plastic deformation.

冲击载荷能量的积累,造成涂层试样硬度变化和塑性变形.

The deformation of the paper consists of elastic deformation and plastic deformation.

纸弛的变形可以不合为不不弹性变形和不弹性变形.

Ductility is a measure of the degree of plastic deformation that has been sustained at fracture.

延伸度是指材料在断裂时发生的塑性形变程度的量度.

The most wear form is adhesive wear, arc erosion and plastic deformation.

粘着磨损 、 电弧侵蚀、塑性变形是其主要的磨损形式.

Plastic deformation and creep are highly undesirable, resilience is favourable.

塑性形变和蠕变是很不利的, 回弹性则是有利的.

The effect of structure flaw on plastic deformation of hard wire rod is discussed.

探讨了硬线盘条的组织缺陷对其塑料性变形的影响.

The plastic deformation improves inhomogeneity of chemical composition and structure, forming streamline shape graphite order arrangement.

塑性变形减少了化学成分的不均匀并改善其组织结构, 形成有序排列的流线型石墨,晶粒细化.

Yielding strength is indicative of the stress at which plastic deformation begins.

屈服强度是指塑性形变开始发生时的应力.

It is assumed that the plastic deformation is incompressible.

它假定塑形变形是不可压缩的.

Hardness is a measure of the resistance to localize plastic deformation.

硬度是材料抵抗局部塑性形变的量度.

It is assumed that plastic deformation stems from the localization of shear strain.

岩样的塑性变形假设根源于塑性应变局部化.

Applied stress causes plastic deformation.

外加应力引起塑性形变.

Plastic deformation concentrates at the ferrite area under the tensile stresses.

在拉应力作用下,塑性变形集中在铁素体区.

When two dissimilar metals differ greatly in strength, using a pressure maintain cavity is one of the effi-ciency method to overcome difficulty because of the severe plastic deformation.

两种强度相差较大的异种金属进行摩擦焊接时，使用保压腔是克服由于软金属的大量塑性变形而给焊接过程带来困难的有效手段之一。

The closed type cover die is working in repeated impact, cold and hot alternation and high pressure friction situation. The die is easy to be crashed, including wearing, plastic deformation, hot cracking etc.

闭式套模在反复冲击、冷热交变、高压摩擦的情况下工作，比较容易产生磨损、塑性变形、热裂纹等损坏失效。

The basal plane grain will "remain" through high temperature plastic deformation because of its feature that easy to form and difficult to disappear.

其中，基面晶粒因易于生成难以消除的特点会在高温塑性变形过程中残留下来。

The erosion mechanism at 90 degrees includes block exfoliation, the plastic deformation of binder phase and the extrusion of the carbides, meanwhile, the brittle fracture character has also been observed with a speed of 420 meters per second.

90°冲蚀机制包括块状剥落，粘结相的塑性变形和碳化物的挤出，420m/s冲蚀的粘结相还表现出了脆性断裂的特点，块状剥落是质量磨损率升高的主因。

During working process, such mechanical failure as teeth breakdown of transmission system and plastic deformation of load flat appears frequently, which result in the break of production, even the paralysis of whole product line, so tremendous economic loss is inevitable for corporations.

工作过程中常常出现传动系统齿断、载荷平台塑性形变等机械故障，由此导致生产断续，甚至造成整条生产线瘫痪，给企业带来巨大经济损失。